Store
The Line
Everything we make goes on a foot. The store opens with three products and no catalogue — insoles first because they are the cheapest thing to trust, slides second because they are the easiest to love, swims third because they are seasonal. Everything marked pipeline is designed and costed and parked until a drop earns it a week of its own.
Every item passes the same test the insole did: **would we use this ourselves, and does the print do something an injection-moulded version couldn't?** If the answer to the second one is no, the honest move is to buy the moulded version and not make it. That question is why this list is short.
Item 01 · Drop 001 · Live
BULL
INSOLES
$99 · lattice comfort, Bitcoin core. A variable-density footbed tuned to your foot, with the ₿ working as a stiffness spine rather than a graphic printed on top of one.
Why print it: a moulded insole is one stiffness everywhere. This one changes cell size and wall thickness between heel and forefoot, per customer, with no tooling cost — because there is no tool.
- Material TPU 95A or PEBA
- Print 5.2 h per pair
- Stack Heel 12 mm · forefoot 6 mm
- Sizes M 6–13 / W 7–14
- Status BEST IN BULL™ eligible
Item 02 · Drop 002 · In the lab
BULL
SLIDES
$128 · recover hard, move easy. Zoned lattice footbed, high heel walls, wide toe box. Supportive rather than plush — it holds the arch instead of letting it sink.
Why print it: recovery slides are foam bricks that flatten in a season. A printed lattice tunes give by zone, and when it does go off it is reprinted from the same file rather than replaced by a guess.
- Material TPU 95A
- Print 18–22 h per slide
- Stack Heel 38 mm · forefoot 34 mm
- Sizes M 6–13 / W 7–14
- Drawing BPL-SL-013-B
Item 03 · Drop 003 · Coming
BULL
SWIMS
$92 · grip, drain, protect. Full-coverage water shoe with 360° drainage, a flexible toe, side protection and a secure fit collar. Quick dry because there is nothing in it to stay wet.
Why print it: every part of a wet-environment shoe wants to be a hole, which is exactly what a lattice already is. Nothing moulded drains like a printed one.
- Material TPU 95A
- Print 7.1 h per pair
- Stack Heel 8 mm · forefoot 6 mm
- Sizes M 6–13 / W 7–14
Item 04 · Pipeline
BULL
HEEL CUP
$62 · a half-length cup that takes the heel and the arch and stops before the forefoot. It slides under a footbed the wearer already likes instead of replacing it.
Why print it: it fits boots and dress shoes where a full-length insole crowds the toe box. Same profile data, half the print time.
- Material TPU 95A
- Print 2.6 h per pair
- Geometry Wall 22 mm · cut line 128 mm
- Open question Whether the feathered cut survives repeated insertion into a tight shoe
That last line is why it is in the pipeline and not in a drop slot. We will not put it in a box until we know.
Custom Bull
From $240. Your mark engineered into the lattice of any of the above — team, shop or brand. Sample first, run second, and the run does not start until you have held the sample. It is the clearest proof that a BullPrint is geometry rather than a print laid on top of a product.
Bull-Grade
A joke that turned into a spec. Bull-Grade is our qualified materials list, and it is short on purpose. We print nothing else. If a product needs a material outside this list it needs a qualification run before it can be sold — a bench decision, not a marketing one.
| Code | Material | What it is for |
|---|---|---|
| BG-01 | TPU 95A | The firm one. Footbeds, insoles and anything that has to hold an arch under load. |
| BG-02 | TPU 80A | The soft one. Qualified and held for a plush variant — nothing in the current line ships in it. |
| BG-03 | PEBA | The performance material. Lighter and springier than TPU, with better rebound over long wear. |
BG-02 is on the list with nothing shipping in it, and that is the point of having a list: qualifying a material and choosing to use it are two different decisions.
Four finishes
Gold is the signature and stays the hero — insoles ship in it. Three supporting finishes let the slides and swims read as everyday footwear rather than trophies, and every one of them is a filament we already qualify.
| Code | Finish | Where it goes |
|---|---|---|
| CW-01 | Gold | The signature. Loud on purpose. Insoles. |
| CW-02 | Graphite | Equipment finish, matte near-black. Slides and swims. |
| CW-03 | Bone | The contrast run. Limited only. |
| CW-04 | Titanium | Industrial grey for premium runs, in PEBA. |
One finish per object. No two-tone prints, no colour-change gimmicks. Where a bull mark needs to contrast — a gold bull on a black slide, a black bull on a white one — it is printed as its own part and seated flush into a pocket, so the two colours are two prints that never meet on one plate.
Bitcoin orange is a filament we do not stock. ₿ appears as geometry, never as a colour.
<p class="pull">Rainbow, silk, glitter and colour-shift filaments print beautifully and make the object look like a hobby print — which is the exact impression this whole brand is built to avoid.</p>
Three drops, not a catalogue
A full-catalogue launch reads as a dropshipper. Three drops read as a lab with a point of view. Each one gets its own week, its own story and its own verdict.
- Wave 01 — the thesis. Insoles, slides, swims. Three footwear products
prove the lattice is a system rather than a one-off.
- Wave 02 — the fit range. Heel cup, custom runs, seasonal colourways. Once
the profile exists, everything else is a variation on it.
- Wave 03 — the programme. Team and shop runs, and reprints for worn pairs.
Owning the file is the whole advantage: a worn pair becomes a repeat order rather than a lost customer.
Editions stay small because we choose to, not because we can't print more. That distinction has to stay true or the scarcity becomes theatre.
What we won't sell
Anything carrying a safety burden we can't back with testing. No orthotic claims, no protective footwear, no climbing, no safety toe. A footbed that fails is an uncomfortable afternoon; those other things fail differently. The line is there on purpose and it does not move for a good quarter.
<p class="note">Prices are in USD. Card and USDC at checkout. Every item is made to order — nothing on this page exists in a warehouse, which is why the print hours are listed next to the price. BEST IN BULL™ is issued by a person at inspection, never by the checkout.</p>